Fireplace Hearth Fence 120x120x120x65cm Aduro offers a three sided child safety screen.  The robust screen can be placed in front of the oven to secure that small children do not come to close to the flames.  The design still ensures a good view of the flames. Measures: Height: 65 cm, Width: 120x120x120 cm Powder coated black metal.

Coupling M/M Black enamel finish

APPLICATIONSuitable for pellet appliances with temperatures up to 750 degrees C.
Pellet Stove Pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
Pellet Stove Pipe should NOT be used to pass through ceilings or wall.

CONSTRUCTIONPellet Stove Pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for Pellet fuel appliances with temperatures up to 750 degrees C.

INSTALLATIONYou should not install a piece of Black Stove Pipe within 3 times the diameter of the flue from combustible material, e.g. wood, plaster boards, etc.
A 5 inch (125mm) diameter piece of Black Stove Pipe should be 15 inches (375mm) away from combustible materials.
When installing make sure Black Stove Pipe is installed the correct way up - the smaller diameter should always be pointing downward.
This is because all the condensates will stay within the flue system and not pass to the outside of Black Stove Pipe.
Each joint should be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.

6 inch Classic Twinwall 135º Tee Ø 150 - BLACK



The 135° Tee is used when you need a cleaning access at the base of the chimney. It is the first piece installed on the external wall and allows for ease cleaning of the flue. The 135° Tee is shaped in such away that it does not restrict the flue gases.
This item comes with a 2 FREE Locking Bands.

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. This is then powder coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kg per cubic metre. All parts are fully welded.
Distance to combustibles is 60mm.

APPROVALS
KC is HETAS Approved and is CE marked

Designation Number is
EN1856-1 T600 N1 D V2 L50040 G60.

INSTALLATION
KC Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

Flue Liner 904L/904L Grade Multifuel (904L/904L Grade)

Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 25 year manufacturers warranty with this product.

 

APPLICATION
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat, smokeless fuels.

CONSTRUCTION
The flue liner has a smooth inner liner made from 904L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 904L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

APPROVAL
Flue Liner is approved and listed by HETAS

WARRANTY
904L Grade Flue Liner is warranted for 25 years (conditions apply)

INSTALLATION - CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.

INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

6 inch Chimney System Pack - House External

The Chimney Pack is used when you are running the flue externally. All the parts you require are included in the Chimney Pack.

CONTENTSThe pack contains:- 1 x Stove Pipe 1 x 45° Bend Stove Pipe 1 x DT - Adaptor to Stove Pipe 2 x DT - Pipe 250mm 1 x DT - Adjustable Length 1 x DT - 135° Tee 1 x DT - Tee Cap 3 x DT - Pipe 1000mm 1 x DT - Pipe 500mm 2 x DT - 45° Bend 1 x DT - Wall Support Bracket 1 x DT - Wall Support Plate 2 x DT - Wall Band 1 x DT - Terminal 12 x DT - Locking bands 1 x Chimney Notice Plate 1 x Carbon Monoxide Alarm 1 x High Temperature Sealant   APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.5mm thick. Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation is compressed rockwool which is injected into the flue giving a density of 180kg per cubic metre. All parts are fully welded – making DT suitable for condensing appliances. Distance to combustibles is 50mm. APPROVALS DT is HETAS Approved and is CE marked. Designation Number is EN1856-1 T600 N1 D V2 L50050 G50.	SKU PACK-6-3 Item House External Designation: EN1856-1 T600 N1 D V2 L50050 G50 System: Dynamic Two Inner Material: 316L Stainless Steel - 0.50mm thick Outer Material: 304 Stainless Steel - 0.50mm thick Fuels: Wood, Oil, Gas, Low sulpher coal Approvals: HETAS / CE Distance to Combustibles: 50mm

Flue Liner 316L/904L Grade Multifuel (316L/904L Grade) - 6 inch

Multi fuel flexible liner made from 904L grade stainless steel on the inner and 316L grade stainless steel on the outer walls, both the smooth inner liner and convoluted outer skin being 0.12mm thick. - 15 year manufacturers warranty with this product

APPLICATION A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat, some smokeless fuels. CONSTRUCTION The flue liner has a smooth inner liner made from 904L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from two strips of steel and the seam is folded in three planes to give a triplelock seal. APPROVAL Flue Liner is approved and listed by HETAS WARRANTY 904L/316L Grade Flue Liner is warranted for 15 years (conditions apply) INSTALLATION - CHECK LIST 1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using) 2.Sweep your chimney. 3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.   INSTALLATION Flue Liner should always be fitted from the top. Make sure the arrows are pointing upwards (gas flow). Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately). Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.   MAINTENANCE It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.	SKU FLMIX-6-1 Item Flue Liner 316L/904L Grade Multifuel (316L/904L Grade) Designation: EN1856-2 T450 N1 D V3 L70012 G Warranty: 15 Years Inner Material: 904L - 0.12mm thick Outer Material: 316L - 0.12mm thick Fuels: Smokeless Approvals: HETAS / CE Manufacturer: Pahflex Model: Superflex

Pipe 1000mm Ø 200 / 8 inch

1000mm Pipe Length.
The effective installed length is 962mm.
This item comes with a FREE Locking Band.

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kg per cubic metre. All parts are fully welded.
Distance to combustibles is 60mm.

APPROVALS
KC is HETAS Approved and is CE marked.

Designation Number
EN1856-1 T600 N1 D V2 L50040 G60.

INSTALLATION
KC Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

Flue Liner 316L Grade Multifuel (316L/316L Grade)

Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product.

 

APPLICATION
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.

CONSTRUCTION
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

APPROVAL
Flue Liner is approved and listed by HETAS

WARRANTY
316L Grade Flue Liner is warranted for 10 years (conditions apply)

INSTALLATION - CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.

INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.